Network Configuration - Uniden UIP300 Administrator's Manual

Network Configuration

Network Configuration is used to assign administrative settings. All of these
settings are also available from the web-based administration and configuration.
Assignments in this menu are used to manage the network settings for the IP
telephones. Users can enter the Network Configuration menu from the
Configuration Menu. There are six network configurations that can be retrieved
or modified.
N Enable/Disable Dynamic Host Configuration Protocol
(DHCP IP Assignment for the Terminals)
N Terminal IP Address
N Terminal Subnet Mask
N Default Gateway IP Address
N Enable/Disable VLAN
N VLAN ID
To access the Network Configuration menu and assign administrative settings:
1. Press Menu.
2. Use the L or M keys to access the Configuration menu, then press Select.
3. Use the L or M keys to access the Network Configuration menu, then
press Select.
47