Table of Contents
Advertisement
UP336BH (WDECT2355) ENG OM
4-WAY CONFERENCING
Fourth person, at either the handset or the base, may be added to the conference call.
For example, to add a fourth party to an ongoing conference call at the base or another
handset, press
either caller from your conversation, press
base). The other parties will still be connected to the call.
INTERCOM/CALL TRANSFER FEATURE
Intercom and Call Transfer features are available for your phone.
Intercom
From handset to handset or to the base
1) Press
/transfer/int'com in standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select
the handset (or the base), press
/vol/
, and then press
select All, all handsets and the base will be paged.
An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press
/transfer/int'com (or intercom or
key,
, or
from the cradle (when AutoTalk is on).
4) To hang up the intercom call, press
From the base to a handset
1) Press intercom on the base in standby mode.
2) Select the handset you want to talk with by pressing number key (1-4).
To page all the handsets press
3) Follow the steps 3-4 under "From handset to handset or to the base."
12/28/04
9:22 AM
Page 59
on the fourth party's handset (or
on the party's handset (or
To intercom
/vol/
or
. If you
on the base). Or press any number
(when Any Key Answer is on), or pick up the handset
on either handset (or intercom on the base).
.
on the base). To remove
• If the party is busy
on the
• If any of the
- Press
- Receive an outside/
• When the party does
Handset
#2
Handset
#3
• Standby Mode - The
or
or out of range, the
handset returns to
standby mode.
following occurs
while selecting the
other handset (or the
base), the operation
will be canceled.
or
.
intercom call or page.
not answer within
one minute, the
operation is canceled.
handset is not in use
and
has not been pressed.
[ 59 ]
Advertisement
Table of Contents
