Table of Contents
Advertisement
Feature Operations
Programmable and Fixed Function Keys
There are eight programmable function keys and eight fixed functions keys in the
UIP200. Programmable function keys can be assigned to any one of the available
functions: One-touch speed dial, Two-touch speed dial, DND, Voice Message
Access (VMA) or Mute. The programmable keys also act as LEDs to indicate the
status of the assigned function.
Table 4 Fixed-Function Key and Programmable Key Defaults
Programmable key 1-4
Programmable key 5
Programmable key 6
Programmable key 7
Programmable key 8
1-Touch Dialing
Programmable Keys 1 through 4 come pre-programmed with 1-Touch dialing
feature. To use the 1-Touch dialing feature, you must program a phone number to
one of the 1-touch programmable keys (see Programming a 1-Touch Number on
page 23). (1-Touch dialing keys do not illuminate to indicate their state).
1-Touch Dialing–Off-Hook Operation
Step 1:
Pick up the cradle or press the
Step 2:
Select the appropriate 1-
the number, the phone will start connecting immediately; otherwise, connection
will start the after approximately 4 seconds.
1-Touch Dialing–On-Hook Operation
Step 1:
Press the desired 1-
Step 2:
Pick up the cradle or press the
key as part of the number, the phone will start connecting immediately;
DIAL
otherwise, connection will start the after approximately 4 seconds.
Key
One-Touch Dialing
Two-Touch Dialing
Do Not Disturb
Voice Message Access
Mute (microphone)
HEADSET
key. If you programmed the
TOUCH
key.
TOUCH
HEADSET
Operation
/
key.
SPEAKER
DIAL
/
key. If you programmed the
SPEAKER
Rev. 1.0, © UAC, May, 2004
UIP200 User's Manual
Page 20 of 27
key as part of
Advertisement
Table of Contents
