Leveling The Hitch Clevis - Landoll 5530 Operator's Manual

HITCH CLEVIS HEIGHT
ADJUSTMENT
5530-hitchclevis

4-6 LEVELING THE HITCH CLEVIS

4-6.1 The hitch clevis height should be ad-
justed to match the drawbar height of the
tractor. This will allow the telescoping hitch
to operate through its most efficient range
and level throughout the field (See Figure
4-4).
4-6
Figure 4-4 Hitch Clevis Height
4-6.2 On a level surface, measure from the
ground to the top side of the tractor drawbar.
For drawbar heights 18" or lower use the
lower hitch clevis holes. For drawbars 20" tall
use the middle hitch clevis holes, and for 22"
or greater use the top mounting holes.