Leveling The Hitch Clevis - Landoll 5530 Operator's Manual

OPERATION AND MAINTENANCE
HITCH CLEVIS HEIGHT
ADJUSTMENT
5530-hitchclevis

Leveling the Hitch Clevis

1. The hitch clevis height should be adjusted to match
the drawbar height of the tractor. This will allow the
telescoping hitch to operate through its most efficient
range and level throughout the field (See
Figure 4-4.)
4-6
Figure 4-4: Hitch Clevis Height
2. On a level surface, measure from the ground to the
top side of the tractor drawbar. For drawbar heights
18" or lower use the lower hitch clevis holes. For
drawbars 20" tall use the middle hitch clevis holes,
and for 22" or greater use the top mounting holes.
F-524-0410 Edition