Landoll 5530 Operator's Manual page 35

4-13.4 Width:
a. Press the FUNC button until the "WIDTH"
icon appears in the display. The number dis-
played is the width of your implement in feet
(See Figure 4-14).
b. To adjust the width, press the UP and
DOWN buttons. If a password has been en-
tered, you will not be able to adjust the width.
c. The width can be adjusted from 0 to 99.9
feet, in tenths of a foot.
4-13.5 Password:
a. The password function allows you to protect
the total acre count, pulses per mile, and
width settings with a password. This stops
anyone from accidentally changing those set-
tings. When the acre counter is shipped, the
password is disabled. You can modify the
pulses per mile and implement width at any
time (See Figure 4-15).
b. Press the FUNC button until the "PASS"
icon appears. The digits will display the word
"ENT" or "dIS".
c. If the display shows "dIS":
1. The password is disabled. The total acre
count, pulses/mile, width, and password
settings can be adjusted using the UP and
DOWN buttons. The password can also be
changed using the UP and DOWN buttons.
40.0
drill width
Figure 4-14 Drill Width
dIS
password disabled
Figure 4-15 Password Disabled
WIDTH
FT
PASS
4-17