Transport Locks - Landoll 5530 Operator's Manual

4-4 TRANSPORT LOCKS

4-4.1 Transport lock pins are provided to se-
cure the grain drill in raised and folded posi-
tions. Do not rely totally on hydraulics when
working beneath raised equipment.
WARNING
INSTALL TRANSPORT LOCK PINS BE-
FORE ATTEMPTING TO SERVICE, AD-
JUST, O R TRANSPORT RAISED
EQUIPMENT.
5530-translock2
Figure 4-2 Telescoping Hitch Transport Lock
4-4
TRANSPORT LOCK
PIN IN STORAGE
POSITION
TRANSPORT LOCK
PIN IN INSTALLED
POSITION
4-4.2 To install the telescoping hitch transport
lock, fully raise the main lift and hitch. Re-
move the pin from the storage position and
install through the hole in the telescoping
hitch (See Figure 4-2). Leave the weight of
the drill on the hydraulic system while trans-
porting. The pin will prevent any uncontrolled
dropping of the hitch.
4-4.3 After folding the drill and raising the
hitch, the transport lock pin may be inserted
in either hole of the wing fold lock over the
top of the hitch (See Figure 4-3). This will in-
sure the fold locks do not come apart while
transporting. Before unfolding the drill re-
move the transport lock pin and install in the
storage position of either wing fold lock.
TRANSPORT LOCK
PIN INSTALLED
FOR TRANSPORT
TRANSPORT LOCK
PIN INSTALLED FOR
STORAGE
5530-translock
Figure 4-3 Folded Drill Transport Lock