Transport Locks - Landoll 5210 Operator's Manual

OPERATION AND MAINTENANCE
TRANSPORT
LOCK STORAGE
POSITION
5210 transport lock locations

Transport Locks

1. Transport lock pins are provided to secure the Grain
Drill in raised position. Do not depend on hydraulics
when working beneath raised equipment or when
transporting.

Install both transport locks before attempting to
service, adjust, or transport raised equipment.
4-4
TRANSPORT
LOCK INSTALLED
FOR TRANSPORT
Figure 4-2: Storage and Transport Position of Transport Locks
WARNING
2. The transport locks are installed on the holders
located on the hitch when not in use. To install the
transport locks:
a. The hitch clevis must be attached to the tractor.
Then fully raise the main lift of the Grain Drill.
b. Remove the L-pins and hairpin clips from the
stored transport locks.
c. Slide the transport locks over the extended
cylinder shafts.
d. Reinstall the L-pins and hairpin clips to secure
the transport locks to the cylinder shafts.
IMPORTANT
Failure to install/remove BOTH transport locks will
result in damage to the grain drill.
3. To remove the transport locks:
a. Fully raise the Grain Drill to remove any weight
setting on the transport locks.
b. Remove the L-pins, hairpin clips, and transport
locks from both cylinder shafts.
c. Return the transport locks, L-pins, and hairpin
clips to the storage locations on the hitch.
F-558-0910 Edition