Installing Your Phone; Setup The Base - Uniden XDECTR055+2 Owner's Manual

Setup the Base

Attach the stand
Before you attach the
stand, you have to decide
if you want the phone to
rest on a desk or hang on
a wall.
1. For desktop use, turn
the stand so the locking
tabs that say
facing the base with the
arrows pointing up.
OR
For wall mount use,
turn the stand so the
locking tabs that say
are facing the base
WALL
with the arrows pointing
down.
2. Align the stand with the
notches on the base.
3. Slide the stand onto the notches until
it clicks into place.

Installing Your Phone

are
DESK
To remove the stand
Pull the locking tabs up
and back (see the black
arrows in the illustration
to the right). Then, slide
the stand straight off the
same direction you put it
on.
D
E
S
K
1