Getting Started; Setting Up The Phone - Uniden EXAI 398 Series Owner's Manual

900mhz integrated digital answerer with caller id/call waiting
Table of Contents

Advertisement

EXAI398 12/26/2 10:32 AM Page 8
If your home has specially
wired alarm equipment
connected to the
telephone line, be sure
that installing the system
does not disable your
alarm equipment.
If you have questions
about what will disable
your alarm equipment,
contact your telephone
company or a qualified
installer.
[ 8 ]
G E T T I N G S T A R T E D

Setting up the Phone

Do the following steps:
A. Choose the best location
B. Install the battery pack
A. Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in
the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS. Here are some important guidelines you
should consider:
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid television sets and
other electronic equipment
Choose a central location
• The location should be close to both a phone jack and a continuous power outlet which is not
switchable.
• Keep the base and handset away from sources of electrical noise such as motors, microwave
ovens, and fluorescent lighting.
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
C. Connect the base unit
Avoid noise sources such as a window by a
street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration, or shock
Avoid personal computers
Avoid other cordless telephones
www.uniden.com

Advertisement

Table of Contents
loading

Table of Contents