I/O-Board Jumpers; Figure 2-14 I/O-Board Leds; Table 2-4 I/O-Board Non-Light-Path-Diagnostics Status Leds - Huawei Tecal RH5485 Problem Determination And Service Manual

2 Introduction

Figure 2-14 I/O-board LEDs

Table 2-4 I/O-board non-light-path-diagnostics status LEDs

LED
Slots 1 - 7 error LEDs
I/O board error LED

2.5.8 I/O-board jumpers

The following illustration shows the jumpers on the I/O board.
2-18 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Problem Determination and Service Guide
Description
When one of these LEDs is lit, it
indicates that an error has occurred in
the associated I/O slot.
When this LED is lit, it indicates that
an error has occurred on the
I/O board.
Note: You must look at the server at
an angle from the front to see this
LED.
Tecal RH5485 Server
Issue 02 (2011-05-25)