H.265 VANGUARD 4x2H / 8x4H / 16x8H
5.4 Remote Settings
You can configure the DVR settings on this page.
5.4.1
Channel
On this page, you can configure Analog and IP Channels, Privacy Mask and etc..
5.4.1.1 Channel
This page will only appear when XVR hybrid mode is selected (OSD Setup < System <
General). You can add IP cameras manually or automatically using this page.
5.4.1.1.1 Analog Channels
This page is only available for VANGUARD 4x2H and VANGUARD 8x4H. If you want to add
more IP cameras to the DVR, you can disable the analog cameras in order to release more
channels for adding IP cameras. For this function to work, you will have to enable the XVR
mode for the DVR in advance (Setup > System > General). Disable one analog channel can
release one channel for adding IP camera.
154