2. Connection and Installation
2.1 Hard Disk Installation
You can install one 3.5" HDD (VANGUARD4x2H) or two 3.5" HDDs (VANGUARD 8x4H / VANGURD
16x8H) inside the DVR for recording videos. The maximum capacity of each HDD is up to 8TB.
1.
Make sure the DVR is power-off.
2.
Unscrew the eight housing screws (4 on the rear panel, 2 on the left and right side each). To
remove the housing cover from the DVR, push the cover backward and then lift it.
3.
Find the SATA cable inside the DVR, and connect the SATA cable to the SATA port on the
HDD.
4.
Find the internal power cable, and connect the internal power cable to the HDD.
H.265 VANGUARD 4x2H / 8x4H / 16x8H
5
Chapter
2