CYP CPLUS-V4H2HPIP Operation Manual page 55

COMMAND
Description and Parameters
set in N1 sharpness h N2
Set the horizontal sharpness level of the specified input.
N1 = 1~4
N2 = 0~20
get in N1 sharpness h
Show the current horizontal sharpness level of the specified input.
N1 = 1~4
set in N1 sharpness v N2
Set the vertical sharpness level of the specified input.
N1 = 1~4
N2 = 0~20
get in N1 sharpness v
Show the current vertical sharpness level of the specified input.
N1 = 1~4
set in N1 picture reset
Set the picture settings reset.
N1 = 1~4
set audio out N1 mute N2
Enable or disable muting the specified audio output.
N1 = A~B
Available values for N2:
ON
OFF
get audio out N1 mute
Show the current mute state of the specified output.
N1 = A~B
[Input port]
[Horizontal sharpness level]
[Input port]
[Input port]
[Vertical sharpness level]
[Input port]
[Input port]
[Output port]
[Mute]
[Unmute]
[Output port]
50