Table of Contents
Advertisement
6.6 Telnet Control
Before attempting to use Telnet control, please ensure that both the unit and
the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7
Windows XP
Mac OS X
Once in the Command Line Interface (CLI) type "telnet" followed by the IP
address of the unit (and the port number if it is non-standard) and then hit
"Enter". This will connect us to the unit we wish to control.
Note 1: If the IP address is changed then the IP address required for Telnet
access will also change accordingly.
Note 2: The default IP address is 192.168.1.50.
39
Click Start, type "cmd" in the search field, and press
Enter.
Click Start > Run, type "cmd", and press Enter.
Click Go > Applications > Utilities > Terminal.
Advertisement
Table of Contents
Need help?
Do you have a question about the CPLUS-V4H2HPIP and is the answer not in the manual?