Tone/Pulse Switch; Applying Power To The Base Unit - Uniden ANA 9500 Operating Manual

Tone/Pulse Switch

Be sure the TONE/PULSE switch is in the TONE position.
Note: Most systems are Tone dialing. Check with your PBX
Administrator if you are not sure whether your system is Tone
or Pulse dialing.

Applying Power to the Base Unit

+ –
DC IN 10V
LINE OUT LINE IN
AC ADAPTOR
AC
Adapter
Use only the supplied AC Adapter: EXP9504
Wrap the Power Cord around the
convenient notch on the bottom.
8
TONE
TONE
PULSE
PULSE
+ –
DC IN 10V
LINE OUT LINE IN
AC ADAPTOR
Line In
From
Telephone
Jack
Line Out
to Host
Telephone