Using Your ANA 9500 Base Unit
Although most of the ANA 9500 operations are performed at the
Handset, there are two operations performed at the Base Unit.
The IN USE/HOLD LED lights
steadily whenever the Handset is
connected to a call.
Placing a Call On Hold
1.
Press HOLD on the Base Unit.
The IN USE/HOLD LED blinks, and the call is "on Hold".
2.
To resume the call, press HOLD on the Base Unit, or press
HOLD on the Handset twice.
The IN USE/HOLD LED lights steadily.
Paging the Handset
Press PAGE/FIND on the Base Unit to Page the Handset for a call,
or to find the Handset if it is misplaced.
CHARGE
BATT
CHARGE
IN USE/HOLD
24
POWER
PAGE/FIND