Using The Handset - Uniden ANA 9500 Operating Manual

Using the Handset

When you pick up the Handset and
press TALK, you will see:
Then you'll see one of the following:
Condition
Line OK
No Connection to Base
Unit
Channel Busy
Line in Use
When communication is made
between the Base Unit and the
Handset, the screen will go to
"Standby", and the phone is ready to
use.
If the Handset is at the range limit of
the ANA 9500, you may see:
Take the following action:
Condition
Warning Tone
Action
Move back in range within 20
seconds
Indicator
TALK LED
Error Tone
Error Tone
Error Tone
During a Call
15
LCD Display
NO SERVICE
SYSTEM
BUSY
LINE IN USE
In Standby Mode
Can't make or answer calls
(Phone may ring intermittently)
Move back within range.