Attaching The Belt Clip To The Handset; Installing The Handset Battery Pack - Uniden ANA 9500 Operating Manual

Before using your ANA 9500, be sure to raise the antenna to the
vertical position.

Attaching the Belt Clip to the Handset

You can use the Belt Clip to attach the Handset to your belt or pocket
for convenient portability.
Snap the tabs of the Belt Clip into
the notches on the sides of the
Handset.
To remove the Belt Clip , pry one
tab at a time from the notch on the
side of the Handset. Carefully lift
the Belt Clip off.
(CAUTION: The Belt Clip is
designed to fit snugly onto the
Handset.)

Installing the Handset Battery Pack

1. Place the Battery Pack onto
the Handset so that it slides
easily along the ridges.
2. Slide the Battery Pack up
onto the Handset until it clicks
into place.
Raise to
Vertical
Position
10