Removing The Handset Battery Pack; Charging The Handset Battery Pack - Uniden ANA 9500 Operating Manual

Removing the Handset Battery Pack

1. Press in on the Battery Pack
Release Latch
2. Slide the Battery Pack off the
Handset
Note: You may have to pull
hard to slide the Battery
Pack off.

Charging the Handset Battery Pack

The Rechargeable Nickel-Cadmium Battery Pack must be fully
charged before using your ANA 9500 for the first time. (Note:
Charge the Standard 400 maH Battery Pack without interruption for
6-8 hours.)
1. Place the Handset on the
Base Unit.
2. Make sure the LED lights. If the
LED doesn't light, check to see
that the AC Adapter is plugged
in,and that the Handset is
making good contact with the
Base Unit Charging Contacts.
11
CHARGE BATT POWER
CHARGE
IIN USE/HOLD PAGE/FIND