Table of Contents
Advertisement
Storage
• At the end of the season, empty Seedboxes and Seed
Meters before cleaning your machine for storage.
• Avoid spraying high pressure washer directly at
bearing seals.
• Grease machine after washing to displace any
residual water.
• Repaint areas where paint has worn off.
• Repair or replace any broken or damaged parts.
• Store in a dry, protected place.
• Before detaching implement from tractor, lower
machine to the ground and tighten nut on Rockshaft
Clamp to prevent movement.
• Install Rockshaft Lock Detent Pin if Rockshaft Lock
Slot aligns with Frame Tab Hole. Lower stand.
Figure 2-17: Storage
OPERATION
2-17
Advertisement
Table of Contents
