Table of Contents
Advertisement
Do Not Lubricate Machine While Machine Is In
Motion. If Any Guards Are Removed For
Lubricating, They Must Be Replaced Before
Operating.
Lubrication
• Grease per recommended lubrication frequency
intervals indicated or if machine is not to be used for
some time. Greaseable components are the same on
each side, right side shown.
WARNING
Figure 4-1: Lubrication (1 of 2)
• Lubricate Roller Chains periodically with quality chain
oil.
For best penetration, lubricate chain immediately after
use while chain is still warm.
NOTE
It is good machine maintenance practice to check all
bolts for tightness during regular lubrications. Tighten any
fasteners that may have loosened during operation.
MAINTENANCE
4-3
Advertisement
Table of Contents
