Table of Contents
Advertisement
3-10 PULL HITCH INSTALLATION
IMPORTANT
SEE FIGURE 3-18 FOR PART NAMES.
3-10.1
Install pull hitch to frame using hitch
pins and cotter pins.
3-10.2
Assemble the hitch ring to the pull hitch
as shown with the recess down.
3-10.3
Install jack on pull hitch. Do not over-
tighten U-screws on jack. It will cause jack to
bind.
Figure 3-18 Pull Hitch Installation
USE JACK MOUNTING TUBE ON RIGHT SIDE
OF PULL HITCH FOR CORRECT ANGLE ON
JACK.
3-10.4
IMPORTANT
Install hose bracket and hose bracket
mount on pull hitch with special nut, screw,
and lock nuts.
3-17
Advertisement
Table of Contents
