Rear Hitch Assembly (Option); Harrow Assembly Installation; Basket Assembly Installation - Landoll 850 FINISHOLL Operator's Manual

3-14 REAR HITCH ASSEMBLY (OPTION)

3-14.1 Install rear hitch in center of frame at
the rear of the unit. Clamp hitch to the rear
tube and the next tube forward with U-bolts,
washer, and 5/8-11 nuts provided. (See Fig-
ure 3-22).
3-14.2 Install hitch in the forward position if
you have a coil tine harrow or 3-bar spike

3-15 HARROW ASSEMBLY INSTALLATION

3-15.1 See Table 3-3 for the page number of
the assembly drawing that will be shipped
with your harrow. If lost or missing, this
drawing can be ordered from Landoll Corpo-
ration.

3-16 BASKET ASSEMBLY INSTALLATION

3-16.1 See Table 3-3 for the page number of
the assembly drawing that will be shipped
with your basket assembly. If lost or missing,
this drawing can be ordered from Landoll
Corporation.
3-24
harrow. Install in the rear position if you have
a 5-bar spike harrow.
IMPORTANT
THE CENTER ARM FOR SOME HARROWS MAY
NEED TO BE MOVED TO THE SIDE TO MAKE
ROOM FOR THE REAR HITCH.