USC Seed Wheel Operator's Manual page 15

13. For LPX Manual treaters (left) and LPX Automated treaters (right) , the system is
run from an HMI touch screen located on the LPX treater control panel.
14. If needed, mount the
extension ring back on top
of the seed wheel.
15. Install the proximity switch
supplied with the seed wheel
back into the extension ring
and wire into the junction box
of the seed wheel.
(See wiring instructions on
page 18)
16. Open the adjustable seed
gate as far as possible .
If the seed gate is not open
fully, seed flow will be
diminished and may even
back up into the seed wheel.
Seed Wheel
HMI screen on
LPX Manual
Control Panel
Seed Wheel on LP Seed Treater
HMI screen on
LPX Automated
Control Panel
Page 15