HP PowerTrust A3589A Manual page 172

HP-UX UPS Monitor Error Messages
Log-Only Messages
MESSAGE
ups_mond: UPS <tty special file name> could not enable;
ignoring that UPS
SEVERITY Warning/Error. System hardware powered by the specified PowerTrust unit is
UNPROTECTED.
MEANING The PowerTrust device configured as <tty special file name> does not behave
as expected when ups_mond attempts communication.
CAUSE These are possible causes:
1. Incorrect PowerTrust unit configuration.
2. Incorrect PowerTrust unit type.
3. Incorrect RS-232 cable connection.
ACTION 1. Ensure that the PowerTrust unit configuration is correct.
2. Ensure that you are using a supported PowerTrust unit type.
3. Ensure that the RS-232 cable is correctly connected.
MESSAGE
ups_mond: UPS <tty special file name> read after enable
failed; <error number>; ignoring that UPS
SEVERITY Warning/Error. System hardware powered by the specified PowerTrust unit is
UNPROTECTED.
MEANING The PowerTrust device configured as <tty special file name> does not behave
as expected when ups_mond attempts communication.
CAUSE The specific cause is denoted by the <error number> in the message.
ACTION 1. Ensure that the PowerTrust unit configuration is correct.
2. Ensure that you are using a supported PowerTrust unit type.
3. Ensure that the RS-232 cable is correctly connected.
A-24 Appendix A