Alarm Status Cleared Messages - HP PowerTrust A3589A Manual

Alarm Status Cleared Messages

The following messages are displayed on the system console to report that an alarm status
condition has been cleared, and the PowerTrust (UPS) has returned to normal operation.
MESSAGE
UPS LDEV <nnn> reports UPS "System Fail" condition cleared.
(UPSWRN 0128)
CAUSE Some time ago, the specified PowerTrust unit had reported a "System Failure"
condition. Now, the "System Failure" condition within the PowerTrust unit
device has been corrected, and the PowerTrust unit is reporting that it has
returned to normal operation.
ACTION No action is needed. This message merely confirms that a previously reported
problem has been corrected.
MESSAGE
UPS LDEV <nnn> reports UPS "Inverter Fail" condition cleared.
(UPSWRN 0129)
CAUSE Some time ago, the specified PowerTrust unit had reported a "Inverter Failure"
condition. Now, the "Inverter Failure" condition within the PowerTrust unit
has been corrected, and the PowerTrust unit is reporting a return to normal
operation.
ACTION No action is needed. This message merely confirms that a previously reported
problem has been corrected.
MESSAGE
UPS LDEV <nnn> reports UPS "Charger Fault" condition cleared.
(UPSWRN 0131)
CAUSE Some time ago, the specified PowerTrust unit had reported a "Charger Fault"
condition. Now, the "Charger Fault" condition within the PowerTrust unit has
been corrected, and the PowerTrust unit is reporting that it has returned to
normal operation.
ACTION No action is needed. This message merely confirms that a previously reported
problem has been corrected.
Appendix B
MPE/iX UPS Monitor Error Messages
Alarm Status Cleared Messages
B-13