Figure 2-5 Removing A Battery Pack From The Battery Box - HP PowerTrust A3589A Manual

Unpacking and Inspecting
Unpacking the UPS
3. Position your free hand under the battery pack for support. See Figure 2-5.
4. Carefully pull the battery pack all the way out of the slot and set it aside in a safe place.
Each battery pack weighs approximately 14.5 kg (33 lbs). Exercise
WARNING
appropriate caution to avoid personal injury when removing the
battery packs.
Battery packs contain hazardous voltages. Do not short
connectors together.
Do not stack battery packs on top of each other; doing so may
damage them or cause physical injury.

Figure 2-5 Removing a Battery Pack from the Battery Box

5. Repeat steps 2 through 4 until all of the batteries have been removed from one side.
6. Repeat steps 1 through 4 for the batteries on the other side of the Battery Box.
When you have finished, you should have removed ten battery packs.
7. Along with one other person, lift the Battery Box off of the box containing the
Electronics Unit and set it aside; then remove the bottom portion of the Battery Box
carton.
2-8 Chapter 2