HP 1U User Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. UPS
  5. StoreEver 1U
  6. User manual
HP 1U User Manual

HP 1U User Manual

Hide thumbs Also See for 1U:
Table of Contents

Advertisement

Quick Links

See also: User Manual
HP 1U UPS

User Guide

Abstract
This document is for the person who installs and maintains HP UPS products. HP assumes you are qualified
in the installation of electrical equipment and trained in recognizing hazards in products with hazardous
energy levels.
Part Number: 792518-001
November 17, 2014
Edition: 1

Advertisement

Table of Contents
loading

Related Manuals for HP 1U

Summary of Contents for HP 1U

  • Page 1: User Guide

    HP 1U UPS User Guide Abstract This document is for the person who installs and maintains HP UPS products. HP assumes you are qualified in the installation of electrical equipment and trained in recognizing hazards in products with hazardous energy levels.

  • Page 2: Important Safety Instructions

    SAVE THESE INSTRUCTIONS. This manual contains important instructions that should be followed during installation and maintenance of the UPS and batteries. The 1U UPS models described in this manual are intended for installation in an environment within 0 to 40°C/32 to 104°F, free of conductive contaminant.

  • Page 3: Personal Safety

    UPS to maintain an identical level of performance and safety. For questions, contact your HP representative. Important: Replace the battery module with the same type battery module, available from HP. Page 3...

  • Page 4: Table Of Contents

    5.3 Battery module replacement ..........................17 5.4 Spares ....................................18 6. Technical Specifications ....................19 6.1 HP R1500 G4 NA UPS and HP R1500 G4 JP/TWN UPS .................19 6.2 HP R1500 G4 INTL UPS ............................20 7. Support and other resources ..................21...

  • Page 5: Overview

    Follow all local regulations for the disposal of packing materials. End of life HP processes products at the end of their service lives in compliance with local regulations. HP works with companies in charge of collecting and eliminating our products at the end of their service lives. Product The product is made up of recyclable materials.

  • Page 6: Weights And Dimensions

    HP R1500 G4 INTL UPS 19.5 kg/43 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in. 1.3 Rear panels HP R1500 G4 NA UPS and HP R1500 G4 JP/TWN UPS USB communication port RS-232 communication port Slot for optional communication...

  • Page 7: User Interface

    2. User Interface 2.1 Control panel The UPS has a five-button graphical control panel. On/Off Power On Button Indicator (green) Normal mode On battery Indicator 100 % 100 % Escape 720 W 10min (yellow) 800VA Enter E ciency: ~ 98% Down Alarm Indicator (red)

  • Page 8: Lcd Window

    2. User Interface 2.2 LCD window The LCD window provides useful information about the UPS, load status, events, measurements, and settings. As the default, or after five minutes of inactivity, the LCD displays the screen saver. The backlight LCD automatically dims after 10 minutes of inactivity. Press any button to restore the screen. Operation Status Normal mode 100%...

  • Page 9: Display Functions

    2. User Interface 2.3 Display functions Press the button to activate the menu options. Use the buttons to scroll through the menu structure. Press button to select an option. Press the button to cancel or return to the previous menu. Display Function Menu Main menu Submenu...
  • Page 10 2. User Interface Continued Description Available settings Default settings Load segments - Auto [Disable] [0s] [1 s] [2 s]…[65354 s] Group 1: Disable shutdown delay During a power outage, Group 2: Disable authorizes UPS to turn off power to equipment connected to Group 1 and/or Group 2 outlets.

  • Page 11: Installation

    3. Installation 3.1 Unpacking and contents check (1) HP 1U UPS (2) Documentation (4) RS-232 communication cable (5) USB communication cable (6) 1U Rack kit (7) Bezel parts (8) Two connection cables for the protected equipment (for International models only) (9) Cable locking system Packing materials must be disposed of in compliance with all local regulations concerning waste.

  • Page 12: Installing The Ups On The Rails

    3. Installation 3.3 Installing the UPS on the rails Follow steps 1 through 4 for mounting the UPS on the rails. M10 screws M10 screws M10 screws M3 screws M10 screws M3 screws M10 screws M10 screws 3.4 Ground connection Page 12 792518-001 Edition 1...

  • Page 13: Communication Ports

    USB RS-232 communication port on the UPS. The UPS can now communicate with HP power management software. Characteristics of the optocoupler RS-232 communications port • Pins 1, 3, 4, 5, 6, 10: not used • Pin 2: common (user) •...

  • Page 14: Operation

    4. Operation 4.1 Startup and normal operation To start the UPS: 1. Verify that the UPS power cord is plugged in. 2. Press the button on the UPS control panel for at least two seconds. The UPS LCD window display changes status to "UPS starting...". 3.

  • Page 15: Return Of Ac Input Power

    4.6 UPS remote control functions The 1U UPS offers a choice between two remote control functions. • RPO: Remote Power Off allow a remote contact to be used to disconnect all the equipment connected to the UPS.

  • Page 16: Maintenance

    The UPS does not protect the equipment anymore. Note: Record the alarm message and the UPS Serial Number, then contact your service representative. 5.2 Updating the UPS firmware To update the UPS firmware, see the HP website (http://www.hp.com/go/rackandpower). Page 16 792518-001 Edition 1...

  • Page 17: Battery Module Replacement

    Minimize the amount of time the UPS uses battery power by matching the UPS configuration with the utility voltage (see "6.1 HP R1500 G4 NA UPS and HP R1500 G4 JP/TWN UPS", page 19 and "6.2 HP R1500 G4 INTL UPS", page 20).

  • Page 18: Spares

    Installing the new battery module Perform the removal instructions in reverse order. • To ensure safety and high performance, only use batteries supplied by HP. • Take care to firmly press together the two parts of the connector during remounting.

  • Page 19: Technical Specifications

    6. Technical Specifications 6.1 HP R1500 G4 NA UPS and HP R1500 G4 JP/TWN UPS Transformer Filter Charger Inverter Battery Rack HP R1500 G4 NA UPS HP R1500 G4 JP/TWN UPS Output Power @ 120V 1440 VA — 1100W Output Power @ 100V 1200 VA —...

  • Page 20: Hp R1500 G4 Intl Ups

    6. Technical Specifications 6.2 HP R1500 G4 INTL UPS Transformer Filter Charger Inverter Battery Rack HP R1500 G4 INTL UPS Output Power @ 230V 1550 VA 1100W Output Power @ 200V/208V 1395 VA 990W AC Input power • Rated input voltage Single phase 200-240V •...

  • Page 21: Support And Other Resources

    Download and have available an Active Health System log for 7 days before the failure was detected. For more informa- tion, see the HP iLO 4 User Guide or HP Intelligent Provisioning User Guide on the HP website (http://www.hp.com/go/ilo/ docs).

Table of Contents