Mpe/Ix Ups Monitor Error Messages; Appendix B: Mpe/Ix Ups Monitor Error Messages - HP PowerTrust A3589A Manual

B

MPE/iX UPS Monitor Error Messages

This appendix lists all UPS-related error message for the MPE/iX operating system. The
messages are generated by the UPS Monitor to report PowerTrust hardware status
conditions that may require corrective action. To receive these messages, your computer
system needs MPE/iX version 5.0 (or later). They are organized in the following categories:
• Power Status Messages
• Alarm Status Messages
• Alarm Status Cleared Messages
• Log-Only Status Messages
NOTE The term UPS (Uninterruptible Power System) is used in all error messages
to refer to the PowerTrust unit. The term UPS Monitor refers to the
software that monitors PowerTrust operation.
All messages are indexed by their exact text. Look up the message text in the
index to find the page where the definition occurs.
Appendix B
MPE/iX UPS Monitor Error Messages
B-1