Raven SmarTrax Installation Manual page 16

Chapter 3
Double-Sided Tape on Case IH Interface Box
FIGURE 10.
Place four double-sided tape strips on the bottom of the Case interface box.
2.
37-Pin Connector Port Location
FIGURE 11.
Connect the round, 37-pin connector from the node harness (P/N 115-4001-092) to the 37-pin port of the
3.
Case interface box.
Remove the backing from the double-sided tape and adhere the Case interface box to the metal plate
4.
located under the back rest and inside the fuse panel compartment.
Note:
Allow enough slack in the cable to allow the storage basket to be reinstalled.
12
Case IH STX/Steiger/Quadtrac & New Holland TJ/T90X0/T9.XXX - Steering Ready SmarTrax™ Installation Manual
37-Pin
Connector
Port