Raven SmarTrax Installation Manual page 27

To Install the Node:
The preferred location for the node is on the right rear corner of the seat.
1.
Node Installation
FIGURE 5.
Connect the large, rectangular connectors to the SmarTrax node.
2.
Mount node to the supplied bracket (P/N 107-0171-914) using supplied bolts (P/N 311-0054-104), flat
3.
washers (P/N 313-2300-012), and nuts (P/N 312-1001-0059).
Remove park brake from base of seat.
4.
Place node bracket (P/N 107-0171-914) between park brake and seat frame. Reuse the M10x30 bolts to
5.
fasten.
Connect the large, round connectors on the node adapter cable (P/N 115-4001-007) for Viper Pro/Envizio
6.
Pro or (P/N 115-4001-018) for Cruizer to the SmarTrax console cable harness (P/N 115-0171-775). Skip
this step for Cruizer specific cable (P/N 115-40001-036).
Manual No. 016-0190-098
Wiring and Electrical Connections
Park Brake Bolts
23