Landoll Brillion X108 Operator's Manual page 31

Field Transport Wheel Ground Clearance: 3 1/2" to 4 1/2"
Wings Float: 5 down and 45
o
Roller Axles: 4 1/2" O.D. steel pipe.
Roller Axle Bearings: Self-aligning triple lip sealed.
Hydraulics: Single tractor system operates both wing and axle cylinders (included with machine).
Two 3 1/2" x 20" wing cylinders on 27', 25' and 23' sizes;
Two 2 1/2" x 20" cylinders on other sizes; axle cylinder is 3" x 16"
Hydraulic lines included to tractor.
Recommended Horsepower: Approximately 1 + H.P. per foot of rolling width.
Options: Scraper kits for 18" smooth rollers and 20" notched rollers.
Manual valve control that allows wings to be preset to a given height.
A-33 sprocket wheels - used on 18" smooth wheels without scrapers.
Safety Chain 10,100# is standard equipment:
Use of a safety chain is recommended if machines are towed on a public road or highway.
Total weight of towed machine must not exceed chain capacity as shown on the identi-
fication tag. If two or more machines are pulled in tandem, a larger chain may be required.
See diagram below for installation guidance (all of the hardware shown may not be used).
Slack in the chain should be only enough to permit turning. Distance from hitch pin to
attachment point or intermediate support should not exceed 9". See safety chain instruc-
tions supplied with chain for photographic illustrations of typical attachment to tractor.
Capscrew,
1-8NC x 2 1/2"
683rev501
up.
o
Flat Washer, 1"
Page 19
Stover Nut, 1-8NC
Chain
6J862