NEC PA1004UL-W User Manual page 96

Setting [TILING]
1. Press the MENU button to display the
on-screen menu and select [DISPLAY] →
[PICTURE SETTING] → [MODE].
This displays the [MODE] screen.
2. Select [TILING] using the ▼/▲ buttons, and
press the ENTER button.
The display returns to the [PICTURE SETTING]
screen.
3. Select [TILING] using the ▼/▲ buttons, and
press the ENTER button.
This displays the [TILING] screen.
4. Set [WIDTH], [HEIGHT], [HORIZONTAL POSITION], and [VERTICAL POSITION]
(1) In the screen for setting the number of horizontal units, select [2 UNITS]. (number of units
in the horizontal direction)
(2) In the screen for setting the number of vertical units, select [2 UNITS]. (number of units in
the vertical direction)
(3) In the screen for setting the horizontal order, select [1st UNIT] or [2nd UNIT]. (look at the
screens, the one on the left is the [1st UNIT] while the one on the right is the [2nd UNIT])
(4) In the screen for setting the vertical order, select the [1st UNIT] or the [2nd UNIT]. (look at the
screens, the one at the top is the [1st UNIT] while the one at the bottom is the [2nd UNIT])
After completing setting for the steps 1 to 4, a single image will be displayed to fill the screen.
72
4. Multi-Screen Projection