NEC PA1004UL-W User Manual page 122

Selecting Screen Size for DICOM SIM [SCREEN SIZE]
This function will perform gamma correction appropriate for the screen size.
LARGE
MEDIUM
SMALL
NOTE:
• This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
A value between 5000 K and 10500 K can be set in 100 K units.
NOTE:
• When [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
When set, the most optimal contrast ratio is adjusted according to the video.
OFF
MOTION IMAGE
STILL IMAGE
NOTE:
• [DYNAMIC CONTRAST] cannot be selected in the following cases.[]
- When the [REF. LIGHT MODE] is set to [ECO2]
- When the input terminal is selected for [SUB INPUT] under [PIP/PICTURE BY PICTURE]
- When performing [GEOMETRIC CORRECTION]
- When [EDGE BLENDING] → [MODE] is set to [ON]
- When [PICTURE SETTING] → [MODE] is set to [ZOOM] or [TILING]
- When [MULTI SCREEN] → [WHITE BALANCE] → [MODE] is set to [ON]
- When [FAN MODE] is set to [HIGH] or [HIGH ALTITUDE]
- When performing portrait projection
For screen size of 300"
For screen size of 200"
For screen size of 100"
Dynamic contrast is disabled.
Most optimal settings for moving images.
Most optimal settings for static images. Rapidly follows any changes in the video.
98
5. Using On-Screen Menu