Selecting A Source - NEC PA1004UL-W User Manual

2-4. Selecting a Source

Selecting the computer or video source
NOTE:
• Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button for 1 second or longer. The projector
will search for the available input source and display it. The
input source will change as follows:
HDMI1 → HDMI2 → DisplayPort → COMPUTER → HDBaseT
→ HDMI1 → ...
• Press it briefly to display the [INPUT] screen.
• Press the ▼/▲ buttons to match the target input terminal
and then press the ENTER button to switch the input. To
delete the menu display in the [INPUT] screen, press the
MENU or EXIT button.
TIP:
• If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the HDMI1, HDMI2, HDBaseT, DP1 or COMP.
button.
2. Projecting an Image (Basic Operation)
23