NEC PA1004UL-W User Manual page 67

Change [REF. LIGHT MODE]
1. With the cursor adjusted to [REF. LIGHT MODE], press the ENTER button.
The [REF. LIGHT MODE] selection screen will be displayed.
2. Use the ▼▲ buttons to make a selection, and press the ENTER button.
The display will return to the [REF. LIGHT MODE] screen and the selected option will be applied.
Press the MENU button to return to the original screen.
NOTE:
• The light module hours used can be checked in [USAGE TIME] on the menu. Select [INFO.] → [USAGE TIME].
• After a lapse of 1 minute from when the projector displays a blue, black or logo screen, [REF. LIGHT MODE] will automatically switch
to [ECO].
• The luminance (brightness) may decrease temporarily depending on the temperature of the operating environment and the [REF.
LIGHT MODE] setting.
This is one of the protection functions called " Forced ECO MODE". W hen " Forced ECO MODE" is in operation, the T EMP. Indicator lights
up in orange. At the same time, the Thermometer symbol [ ] is displayed at the lower right of the menu screen. The temperature
inside the projector decreases due to the room temperature being lowered, cancelling the " Forced ECO MODE" and returning to the
original brightness.
43
3. Convenient Features