NEC PA1004UL-W User Manual page 175

Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default
background is [BLUE].
NOTE:
• Even when the background logo is selected, if two pictures are displayed in [PIP/PICTURE BY PICTURE] mode, the blue background
is displayed without the logo when there is no signal.
[HDBaseT OUT SELECT]
Select signal to output from the HDBaseT OUT/Ethernet port on the projector.
OFF
AUTO
HDMI1
HDMI2
DisplayPort
HDBaseT
NOTE:
• Signal thru the COMPUTER IN terminal can not be output. In the state [PIP] or [PICTURE BY PICTURE] has been set and [AUTO] has
been set for this function, moreover, the input terminal for the main screen is the COMPUTER and the input terminal for the sub
screen is one among the HDMI 1 IN, HDMI 2 IN, DisplayPort IN terminals, or HDBaseT IN/Ethernet port, the signal from the sub
screen will be output.
• If the set input terminals for main and sub screen for [PIP] and [PICTURE BY PICTURE] are differed from the selected input terminals,
any image will be output.
• 4K60p and 4K50p signals can not be output.
[EDID VERSION]
Switch the EDID version for the HDMI 1 IN and HDMI 2 IN terminals.
MODE1
MODE2
NOTE:
• If image and sound can not be output in [MODE2], switch to [MODE1].
No signal is output.
Output the input signal. When two images are projected simultaneously (PIP/PICTURE BY PICTURE),
the image for the main screen is output.
Output the input signal thru the HDMI 1 IN terminal.
Output the input signal thru the HDMI 2 IN terminal.
Output the input signal thru the DisplayPort IN terminal.
Output the input signal thru the HDBaseT IN/Ethernet port.
Supports general signal
Supports 4K signal
Select this mode for displaying 4K image using the device supporting 4K
151
5. Using On-Screen Menu