NEC PA1004UL-W User Manual page 185

Digital RGB signal connection
• Connect a commercially available HDMI cable between the computer's HDMI output connector
and the projector's HDMI 1 IN or HDMI 2 IN connector.
• Connect a commercially available DisplayPort cable between the computer's DisplayPort output
connector and the projector's DisplayPort input connector.
DisplayPort IN
DisplayPort cable
(not supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
HDMI 1 IN
HDMI 2 IN
DisplayPort IN
Cautions when connecting an HDMI cable
• Use a certified High Speed HDMI® Cable or High Speed HDMI® Cable with Ethernet.
HDMI 1 IN
HDMI 2 IN
INPUT button on the projector cabinet
HDMI1
HDMI2
DisplayPort
6. Connecting to Other Equipment
Button on the remote control
161
HDMI cable (not supplied)
HDMI1
HDMI2
DP1