NEC PA1004UL-W User Manual page 71

11. Use the ▲▼◀▶ button to select another icon which points in the direction.
On the [CORNERSTONE] screen, select [EXIT] or press the EXIT button on the remote control.
The confirmation screen is displayed.
12. Press the ◀ or ▶ button to highlight the [OK] and press the ENTER button.
This completes the [CORNERSTONE] correction.
• Select [CANCEL] and press the ENTER button to return to the [CORNERSTONE] screen.
Selecting [CANCEL] will return to the adjustment screen without saving changes (Step 3).
Selecting [RESET] will return to the factory default.
Selecting [UNDO] will exit without saving changes.
NOTE:
• Even when the projector is turned on, the last used correction values are applied.
• Carry out either one of the following actions to clear the adjustment value of [CORNERSTONE].
- In Step 11, select [RESET] and then press the ENTER button.
- In the state [CORNERSTONE] has been selected for [MODE] in the [GEOMETRIC CORRECTION]:
* Press the Geometric. button for 2 or more seconds.
* Run [DISPLAY] → [GEOMETRIC CORRECTION] → [RESET] in the on-screen menu.
• Using [CORNERSTONE] correction can cause the image to be slightly blurred because the correction is made electronically.
• A commercially available USB mouse is available for [CORNERSTONE] correction.
47
3. Convenient Features