NEC PA1004UL-W User Manual page 48

Selecting Default Source
You can set a source as the default source so that it will be displayed each time the projector is
turned on.
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button to select [SETUP] and press the ▼ button or the ENTER button to select
[MENU(1)].
3. Press the ▶ button to select [SOURCE OPTIONS] and press the ▼ button or the ENTER
button.
4. Press the ▼ button three times to select [DEFAULT INPUT SELECT] and press the ENTER
button.
The [DEFAULT INPUT SELECT] screen will be displayed.
(→ page 150)
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7. Restart the projector.
The source you selected in step 5 will be projected.
NOTE:
• Even when [AUTO] is turned on, the [HDBaseT] will not be automatically selected. To set your network as the default source, select
[HDBaseT].
2. Projecting an Image (Basic Operation)
24