NEC PA1004UL-W User Manual page 78

4. Select the 3D video format.
(1) Press the MENU button to display the on-screen menu and select [ADJUST] → [3D SETTINGS].
(2) Press the ▼ button to align the cursor with the [FORMAT] and press the ENTER button.
The format screen will be displayed.
(3) Select the input signal format using the ▼ button and then press the ENTER button.
The 3D settings screen will disappear and the 3D video will be projected.
Press the MENU button and the on-screen menu will disappear.
The 3D caution message screen will be displayed when switching to a 3D video (default factory
setting when shipped). Please read the "Health Precautions" on the previous page to watch
videos in the correct manner. The screen will disappear after 60 seconds or when the ENTER
button is pressed. (→ page 124)
5. Turn on the power supply of the 3D eyewear and wear the eyewear to watch the video.
A normal video will be shown when a 2D video is input.
To watch a 3D video in 2D, select [OFF(2D)] in the [FORMAT] screen mentioned above in (3).
54
3. Convenient Features