NEC PA1004UL-W User Manual page 123

Adjusting Brightness [LIGHT MODE]
Adjust the brightness of the projector and save it for each input signal.
With the [REF. LIGHT MODE] set to [NORMAL], the adjustment will be valid if the [PICTURE] → [MODE]
is set to [PROFESSIONAL]. (→ page 96, 128)
LIGHT ADJUST
CONSTANT BRIGHTNESS
Adjusting White Balance [WHITE BALANCE]
This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level
of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen.
[COLOR CORRECTION]
Corrects the color for all signals.
Adjusts the tone for the colors red, green, blue, yellow, magenta and cyan.
RED HUE
SATURATION
GREEN HUE
SATURATION
BLUE HUE
SATURATION
YELLOW HUE
SATURATION
MAGENTA HUE
SATURATION
Brightness can be adjusted in 1% increments from 50 to 100%.
OFF [CONSTANT BRIGHTNESS] mode will be canceled.
ON Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF] is
selected, the same settings will remain in effect even when the projector is turned
off.
• To re-adjust the brightness, first turn this setting [OFF] before making further
adjustments.
NOTE:
• The [CONSTANT BRIGHTNESS] setting will not be saved for each input signal.
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
+ Direction
− Direction
Magenta direction
Yellow direction
Vivid
Weak
Yellow direction
Cyan direction
Vivid
Weak
Cyan direction
Magenta direction
Vivid
Weak
Red direction
Green direction
Vivid
Weak
Blue direction
Red direction
Vivid
Weak
99
5. Using On-Screen Menu