NEC PA1004UL-W User Manual page 161

DATE AND TIME SETTINGS
You can set the current time, month, date, and year.
NOTE:
• The projector has a built-in clock. The clock will keep working for about a month after the main power is turned off. If the main
power is off for a month or more, the built-in clock will cease. If the built-in clock ceases, set the date and time again. The built-in
clock will not cease while in the standby mode. In order to activate the built-in clock continuously even when the projector is not
used, leave it in the standby state not plugging off the power cord.
TIME ZONE SETTINGS
DATE AND TIME SETTINGS
SUMMER TIME SETTINGS
[MOUSE]
This function is for using a commercially available USB mouse via the USB-A port on this projector.
BUTTON
SENSITIVITY
NOTE:
• This setting is not guaranteed motion of all commercially available USB mouses.
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the [CONTROL PANEL LOCK] function.
NOTE:
• How to cancel the [CONTROL PANEL LOCK]
When the [CONTROL PANEL LOCK] is set to [ON], press the EXIT button on the cabinet for 10 seconds or longer to cancel the [CONTROL
PANEL LOCK] setting.
TIP:
• When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu.
• This [CONTROL PANEL LOCK] does not affect the remote control functions.
Select your time zone.
Set your current date (MM/DD/YYYY) and time (HH:MM).
INTERNET TIME SERVER: If you place a check mark, the projector's built-in clock will be synchronized
with an Internet time server in every 24 hours and at the time of projector's startup.
UPDATE: Synchronizes the projector's built-in clock immediately. The [UPDATE] button is not avail-
able unless the [INTERNET TIME SERVER] check box is turned on.
If you place a check mark, the clock for daylight saving will be enabled.
Select for using the mouse either by right or left hand.
Select the sensitivity of mouse among [FAST], [MEDIUM] and [SLOW].
137
5. Using On-Screen Menu