NEC PA1004UL-W User Manual page 131

[SIGNAL TYPE]
Selection of RGB and component signals. Normally, this is set to [AUTO]. Please change the setting
if the color of the image remains unnatural.
AUTO
RGB
REC601
REC709
REC2020
[VIDEO LEVEL]
Selection of the video signal level when connecting an external device to the HDMI 1 IN terminal,
HDMI 2 IN terminal, DisplayPort input terminal, and HDBaseT IN terminal of the projector.
AUTO
NORMAL
ENHANCED
SUPER WHITE
[HDR MODE]
AUTO
OFF
ON
NOTE:
• These options are available exclusively for 4K signal.
Automatically distinguishes RGB and component signals.
Switches to the RGB input.
Switches to the component signal conforming to the ITU-R Rec601 standard.
Setting appropriate to SDTV images.
Switches to the component signal conforming to the ITU-R Rec709 standard.
Setting appropriate to Hi-Vision images.
Switches to the component signal conforming to the ITU-R Rec2020 standard.
Setting appropriate to 4K images.
The video level is switched automatically based on the information from the device outputting the
signal.
Depending on the connected device, this setting may not be made properly. In this case, switch to
[NORMAL] or [ENHANCED] from the menu and view with the optimum setting.
This disables the enhanced mode.
This improves the image's contrast, expressing the dark and light sections more dynamically.
The video contrast is improved and the dark areas appear more dynamic.
Automatically distinguishes HDR signal.
Projects the image based on the input signal
Projects the image conforming to the HDR signal
107
5. Using On-Screen Menu