5.1.2 Changing the IP Address of the ProtoAir with FieldServer Toolbox
•
Ensure that FieldServer Toolbox is loaded onto the local PC. Otherwise, download the
FieldServer-Toolbox.zip via the Sierra Monitor Resource Center
•
Extract the executable file and complete the installation.
•
Double click on the FS Toolbox Utility and click Discover Now on the splash page.
•
Find the desired gateway and click the Configure Device button (gear icon) to the right of the
gateway information.
•
Select Network Settings in the Configure Device window.
•
Modify the IP Address (N1 IP Address field) of the gateway Ethernet port.
The following fields may also be changed as needed: Netmask (N1 Netmask field), DHCP
o
Client State (N1 DHCP Client State field), IP Gateway (Default Gateway field) and DNS 1 & 2
(Domain Name Server fields)
NOTE: If the gateway is connected to a router, the Default Gateway field of the gateway should be
set to the IP Address of the connected router.
NOTE: Do not change the DHCP Server State (N1 DHCP Server State field).
NOTE: If DNS settings are unknown, set DNS1 to "8.8.8.8" and DNS2 to "8.8.4.4".
•
Click Update IP Settings, then click on the Change and Restart to restart the Gateway and
activate the new IP Address.
Page 15 of 43
Siemens ProtoAir Start-up Guide
Software
Downloads.