Mounting; Figure 1: Din Rail - SMC Networks FieldServer QuickServer FS-QS-12 0 Series Startup Manual

4

MOUNTING

The following mounting options are available:

Product comes with tabs for wall or surface mount. These can be snapped off if not required.

DIN Rail Mounting Bracket - included in the accessory kit or ordered separately (part # FS-8915-35-
QS).
NOTE: Install only as instructed, failure to follow the installation guidelines or using screws without the
DIN Rail Mounting Bracket could result in permanent damage to the product.
NOTE: If the FieldServer is removed from the din rail, use the original screws to reattach. Longer
screws will damage the FieldServer.

Figure 1: DIN Rail

Page 8 of 46
QuickServer Start-Up Guide
Din Rail
Tab