Auth Only (Credit) - Ingenico iWL255 Quick Reference Manual

4. Key in the transaction amount and press [Enter].
Terminal displays "Pass Terminal to Customer," the cardholder
5.
presses [F1] to confirm the transaction amount.
6. If tip is enabled, customer can select either [1]-Tip percentage,
[2]-Tip amount, or [3]-No Tip. If tip percentage is selected,
cardholder then can select one of three pre-set tip percentage
options, or select Other to key in a specific tip percentage and
press [Enter] to confirm. If tip amount is selected, cardholder can
enter dollar amount for tip and press [Enter] to confirm.
7. The cardholder presses [F1] for Yes to confirm the total amount.
Terminal displays "Swipe/Insert/Tap Card," the cardholder swipes
8.
the card or manually enters the card number.
9. Cardholder taps his/her card if the card is a contactless card.
10. Terminal starts to communicate with Global Payments. Once the
transaction is complete, the merchant copy of the receipt is printed.
11. Press [Enter] to print the customer copy of the receipt.
7 – Auth Only (Credit)
An auth only transaction is used to reserve an amount against a card
holder's available credit limit for a certain period of time. Note that auth
only is a non-draft capture transaction and will not settle transactions.
1. At the idle screen, press [Enter] to enter the main menu, and then
press [0] to select Auth only.
2. Key in the total auth only amount and press [Enter].
Terminal displays "Pass Terminal to Customer," and then hand
3.
the terminal to the cardholder.
4. The cardholder swipes his/her card/manually enters card
number/inserts the chip card/taps the card.
5. The cardholder processes customer EMV prompts and enters PIN.
6. Enter the last four digits of the card number (if enabled) and then
press [Enter]. (This extra step helps to reduce fraud and
chargebacks.)
7. Terminal will connect with host and print auth only receipt.