Lubrication Maintenance - Landoll Tilloll 877 Operator's Manual

OPERATION AND MAINTENANCE

Lubrication Maintenance

1. A proper maintenance schedule will insure a long
operating life and peak performance. Performing the
following lubrication will ensure maximum operating
life of the 877 Tilloll
Figures 4-16.
2. When lubricating the Tilloll, SAE multi-purpose EP
grease, or EP grease with 3-5% molybdenum sulfide
is recommended. Wipe soil from fittings before
greasing. Replace any lost or broken fittings
immediately.
3. Disc gang and conditioner reel bearings are
equipped with seals that will let grease pass and not
harm the seal. Regular lubrication will maintain a full
grease cavity and help purge any contaminants.
Grease the bearings before long periods of storage
to prevent moisture buildup within the bearing cavity.
4-14
See Table 4-1 and See
4. Wheel seals, when properly installed, will allow
grease to pass without harm to seals. Regular
lubrication will extend service life, particularly in
severe operating conditions.
F-1072-0320