Quantum Data HDMI P-Scope Quick Start Manual page 6

P-Scope Quick Start Guide – Rev. AP5
Top level menus
There are a series of top level buttons on the P-Scope graphical interface. These are described in the
following table:
Menu
File
Instrument
Capture Control
Selection Function
Quit Enables you to quit out of the P-Scope application.
Reconnect If the P-Scope application has lost connection with the
PC, this option enables you to reconnect using the same
IP address.
System Opens up the Configuration Menu which enables you to:
Configuration
Enable Logging Creates a log of the command line data being sent to the
P-Scope. This is primarily for debug purposes.
Tile Window Tiles the window horizontally.
Cascade Windows Configures the windows in a cascading manner.
•
set the IP address
•
set the subnet mask
•
set the gateway
•
enable or disable DHCP
P/N 68-00214